16. Version History

In order to see the updates, please remove the cookies or navigate the manual in incognito mode.

Table 16.1 Version history.

Date

Author

Description

02/07/2025

Daniel Hernandez

Specify information about obtaining an MPO to MT fiber in Section 4.2.1.

12/04/2024

Daniel Hernandez

Specify information about VTRx+ channels when using MPO Fanout in Section 4.2.

16/01/2024

Daniel Hernandez

Information about SW9 was added in Section 14.2.3 and Section 8.3.

14/09/2023

Daniel Hernandez

Fixed FMC pin typos in Table 13.5 for ADC1, VDAC, GPIO0, GPIO13 and GPIO14.

18/10/2022

Daniel Hernandez

Fixed FMC pin typos in Table 13.5 for GPIO5 and GPIO6.

30/08/2022

Daniel Hernandez

Added new note in Section 5.

07/06/2022

Daniel Hernandez

  • Fixed typo in Section 8.5.1 for [0x0a6] EPCLK28ChnCntrH.

  • Added more information in Section 2 about the MT-MPO connection.

  • Added more information in Section 4.2 about the MT-MPO connection.

  • Removed information in Section 4 about the SFP adaptor board (no longer provided).

19/02/2022

Daniel Hernandez

  • Fixed link addresses of the lpGBT EC registers in Section 8.5.1.

21/01/2022

Daniel Hernandez

30/11/2021

Daniel Hernandez

  • Resized and increased pictures quality. Added ZCU102 on Table 7.1.

  • Added multiple tables for the configuration pins in Section 13.8.

03/09/2021

Daniel Hernandez

Added small guide on how to communicate with an SCA using the LpGBT housed on the VLDB+: Section 8.5.1.

23/07/2021

Daniel Hernandez

Added ZCU102 as an official Evaluation Kit to which a VLDB+ can be connected. Section 1.1 and Section 9 updated accordingly.

20/07/2021

Daniel Hernandez

Added new known issue for all the VLDB+ versions housing lpGBT V0 in Section 14.2.2.

22/06/2021

Daniel Hernandez

  • Added new information about matched lengths in Section 9.1.2.

  • Added information about the routed length of the high speed signals in Section 13.

17/05/2021

Daniel Hernandez

  • Added new information about the SFP Adaptor Board in sfp+_info.

  • Added new pictures in Section 4.

28/04/2021

Daniel Hernandez

  • Fixed wrong description in Section 13.14 about J3.

  • Fixed broken hyperlink in the note of the Section 13.10. Updated according to each lpGBT version.

  • Added information about the pluggable Phoenix connector in Section 2.6.

  • Fixed actual VLDB+ minimum input voltage from 5V to 10V in Table 13.20.

10/02/2021

Daniel Hernandez

19/11/2020

Daniel Hernandez

Added 2 weblinks for the optional purchase of the TSTOUT connectors and cables on Section 11.

28/09/2020

Daniel Hernandez

  • Added a new info note on Section 5.

  • Fixed the actual VLDB+ minimum input voltage from 5 V to 9.5 V on Section 7.1.

17/09/2020

Daniel Hernandez

Removed from the Section 13.18 signals EDINEC_P and EDOUTEC_N (they are connected to the VLDB+ mHDMI).

02/09/2020

Daniel Hernandez

  • Fixed the actual EDOUT21N FMC position from J1 to J10 on Table 13.3.

  • Fixed typo EDIN22N|J1–H23 is actually EDIN21N|J1–H23 on Table 13.2.

31/07/2020

Daniel Hernandez

Added new information about the VTRx+ connectivity on Section 2.4 and Section 4.2.

23/07/2020

Daniel Hernandez

Added link to the PiGBT manual for Fusing on Section 12.

22/07/2020

Daniel Hernandez

Updated a new known issue on Section 14.1.8.

10/06/2020

Daniel Hernandez

Updated a new known issue on Section 14.1.7.

30/06/2020

Daniel Hernandez

10/06/2020

Daniel Hernandez

Updated note information about PB1 Reset on Section 4.1

05/06/2020

Daniel Hernandez

First official release

27/01/2020

Daniel Hernandez

First overview draft